重庆石材3匹翻新机
参数:
型号
Type 功率
Power 电压
Voltage 底盘直径
Chassis diameter 机身重量
Machine weight 电线长度
Cable length 转速
speed
KVG-17F 3.0HP 220V/50HZ 18” 68KG 13M 200
特点:
1. 负重可达150KG或以上;
2. 强劲动力,可以轻松处理高低不平的剪口;
3. 200转高速,18"底盘,比一般机器转速快一倍,配上六头自转盘机器转速可达500转以上,做花岗石效果特佳;
4. 移动快捷,操作简单
详细说明:
3匹200转石材翻新晶面机The polishing machine of 3HP 200
● 负重可达150KG或以上
Load up to 150KG or more
● 匹强劲动力,剪口高低整平,轻松处理
The strong motivation is 4HP, deal with the rough stone easy
● 200/300转高速,18寸底盘,提高工作效率(比平常转速机械翻新快一倍)
200/300rpm high-speed, 18 inch chassis, improve work efficiency (Twice as fast than
the average machine)
● 移动快捷,操作简单
Move fast, operation simple
●特别注意:由于本机对电压的稳定要求极高,只能单线接电源,对电压不稳定的地区可能不太适用
Special attention: As the machine to a high-voltage requirements, then the power can only be one-way, it may not be applicable to the local of voltage instability
重庆石材3匹翻新机